Associating A Directory With Direct Keypad Call; Choosing The Display Language - Nortel M760 User Manual

Associating a directory with direct keypad call

You can choose the directory associated with the direct keypad call (refer to section on Dia-
ling a correspondent from the directories by name).
Int.Name

Choosing the display language

Messages broadcast by the display are from two sources: messages from the set and messages
specific to the associated system.
If your set is installed with a recent version system, you have access to only one menu.
The language synchronization is supplied automatically by the system.
Otherwise, a specific menu will let you choose the language in which messages from the set
are displayed.
Choosing the set
internal messages lan-
guage:
1 - Press the key.
The display shows " PROGRAMMING".
2 - Press twice the
The display indiactes " DIRECTORIES MANAGEMENT".
3 - Press the key.
The display shows the first selection of «BY DEFAULT SEAR-
CH FROM DIR? Private».
4 - Press the interactive key corresponding to the desired list:
Private - Int.Name - Ext. Name (Int.Name: for example).
Depending on the choice made, the direct call on the keypad
is from the private directory or from the shared directory of
internal names or from the shared directory of external names.
This setting is used to choose the language in which internal
messages of the set are displayed.
1 - Press key.
The display indicates « PROGRAMMING».
key.
Settings
81