Switching From One Correspondent To Another; Releasing One Correspondent; Setting-Up A Conference Call - Nortel M760 User Manual

Switching from one correspondent to another

You want to switch from one correspondent to another.
Shuttle

Releasing one correspondent

You want to release one of the parties (the correspondent with whom you are talking).
Recover

Setting-up a conference call

You want to talk with each of the two parties at the same time (this feature is provided if you
have initiated one of the calls).
Conf.
Terminating
the conference call:
Transfer
- Press the Shuttle interactive key.
You can converse alternatively with each of the
correspondents, but they cannot converse with each other.
The correspondent shown on the right-hand side of the display
is always the one on hold.
- Press the Recover
You recover the correspondent who was on hold.
- Press the Conf. interactive key.
A three-way conference call is set-up between you and your
two parties.
If one of them hangs up, you remain on-line with the other.
Suppose you want to leave your two parties to talk to each
other during the conference call:
- Press the Transfer
You can also simply hang-up the handset or press the
key.
The two parties remain on-line with each other.
Note: in the event of a failure, your telephone set rings again.
interactive key.
interactive key.
During A Call
red
25