Locking The Set; Locking Your Set; Calling An External Correspondent From The Locked Set - Nortel M760 User Manual

Locking the set

Locking the set
Use this function during absences, for example, so you can block outgoing calls from your set
and prevent access to your logs (LNR calls log and incoming calls log) as also to your private
directory.
Note: accessing the directory of internal names is possible.
Important: before activating the locking of your set, you must first have customized your
password (refer to section on Settings - Customizing the set password).

Locking your set

Funct.
Feature
-->
Lock
Modify

Calling an external correspondent from the locked set

If you have locked your set but may at the time want to call an external correspondent without
unlocking your set.
Note: accessing the directory of external names is not possible.
or
76
1 - Press the Funct.
The display shows "SELECT A FUNCTION".
2 - Press the Feature
The display shows "SELECT A FEATURE".
3 - Press the interactive key
The display shows "EXTERNAL CALLS AUTHORIZED".
4 - Press the Modify
The display shows "SET LOCKED EXCEPT FOR EMER-
GENCY CALLS".
1 - Hold the red key
The display waits for the locking confirmation.
2 - Press the key.
The display shows "SET LOCKED EXCEPT FOR EMER-
GENCY CALLS".
Note: you can still call an internal correspondent with the set
locked.
1 - Dial the external access code
The display will ask you to enter your password.
interactive key.
interactive key.
- - > then Lock.
interactive key.
pressed down for 3 seconds.
(0).