Table of Contents
Advertisement
9
Select the device to be configured on the VLAN by doing one of the
following:
•
Select from the device list.
•
Click On All Devices to select all devices in the list.
10 Click Ok.
Table 26
describes the items in the New VLAN dialog box.
Table 26 New VLAN dialog box items
Item
Description
Id
A number between 1 and 4,094 that identifies the new VLAN
configured on the network.
Name
Name given to the VLAN.
QosLevel
For a Passport 8000 Series switch, you can set the Quality of
Service level for traffic in the VLAN to a level between 1 and 8.
DsField
For a Passport 8000 Series switch, you can set the Differentiated
Services field for traffic in the VLAN to a level between 1 and 54.
High Priority
For a Passport 1000 Series switch, you can select HighPriority
mode for all traffic in the VLAN.
Type
Type of VLAN:
•
•
•
•
On All Devices
Selects all devices in the list.
Creating a source IP subnet-based VLAN
Source IP subnet-based VLANs are supported only on Passport 1000 Series and
Passport 8000 Series switches.
To create a source IP subnet-based VLAN:
1
In the navigation pane, select an STG.
2
Do one of the following:
•
From the menu bar, choose Edit > Insert.
•
On the toolbar, click Insert.
Chapter 4 Using VLAN Manager
Port-based VLAN
Source IP subnet-based VLAN
Protocol-based VLAN
Source MAC address-based VLAN
Using Optivity Switch Manager, Release 1.1.0.0
85
Advertisement
Table of Contents
