Table of Contents
Advertisement
62
Chapter 4 Using VLAN Manager
To view the VLAN information in the contents pane:
The example in
Default VLAN. The Default (1) folder opens in the contents pane when you
select Default (1) from the navigation tree.
Status bar
The VLAN Manager status bar
the VLAN Manager window and contains two fields.
VLAN Manager status bar fields.
Table 13 VLAN Manager status bar fields
Field
Message
Icon
Finding network resources
You can locate an entry in a field that contains a particular item of information,
such as text, seed address, or VLAN ID number.
To find a network resource:
1
Click any device in the navigation tree or contents pane, and do one of the
following:
•
208963-B
In the navigation pane, select an STG or VLAN icon.
Figure 16
Description
Located on the left, the message field displays information about VLAN
manager operations.
Located on the right, the icon field provides a legend for different types of
VLANs found in the network:
•
port–a VLAN in which the ports are explicitly assigned to the VLAN.
•
subnet–a VLAN in which ports are dynamically added to the VLAN
based on source IP subnet.
•
protocol–a VLAN in which ports are dynamically added to the VLAN
based on a network protocol.
•
mac–a VLAN in which ports are dynamically added to the VLAN
based on the source MAC address.
From the VLAN Manager menu bar, choose Edit > Find.
shows the VLAN membership information for the
(Figure 14 on page
58) is located at the bottom of
Table 13
describes the
Advertisement
Table of Contents
