Table of Contents
Advertisement
170
Chapter 7 Using Log Manager
Passport/Accelar 1000 Series switches (version 2.x)
To upload a Passport/Accelar 1000 Series syslog file to your management station,
use the CLI
shipped with the switch.
For example, the following CLI command and prompt sequence copies a syslog
file to the management station located at IP address 10.170.137.10:
Passport-1200# copy f t
Enter destination tftp server address [10.170.137.105]
Enter destination file [syslog]: syslog
tftp starting ... Press any key to abort the operation.
tftp result: success
Starting Log Manager
To start Log Manager:
•
•
The SysLog dialog box opens
dialog box does not contain any log file information.
208963-B
command as described in the CLI reference guide that was
copy
Do one of the following:
From the Optivity Switch Manager menu bar, choose Actions > Log
Manager.
On the Optivity Switch Manager toolbar, click Log Manager.
(Figure
83). Until you open a syslog file, the
:
Advertisement
Table of Contents
