Table of Contents
Advertisement
•
An access (untagged) port can belong to one and only one port-based VLAN
or it can belong to one and only one policy-based VLAN for the given
protocol.
•
If you enable tagging on a port that is in a VLAN, the spanning tree group
configuration for that port is lost.
•
A frame's VLAN membership is determined by the following order of
precedence:
— VLAN ID
— Source MAC-based VLAN
— IP subnet-based VLAN
— Protocol-based VLAN
— Port-based VLAN
Creating a port-based VLAN
To create a port-based VLAN:
1
In the navigation pane, select an STG.
2
Do one of the following:
•
From the menu bar, choose Edit > Insert.
•
On the toolbar, click Insert.
The New VLAN dialog box opens
Chapter 4 Using VLAN Manager
(Figure
32).
Using Optivity Switch Manager, Release 1.1.0.0
83
Advertisement
Table of Contents
