Positioning Your Projector; Choosing A Location - BenQ CinePrime HT3560 User Manual

Positioning your projector

Choosing a location

Before choosing an installation location for your projector, take the following factors into consideration:
• Size and position of your screen
• Electrical outlet location
• Location and distance between the projector and the rest of your equipment
The projected image size and vertical offset depend on how far you place the projector, and the zoom
setting you choose. The table and diagram from
distance and height of your projector
You can install your projector in the following ways.
1. Front Table
Select this location with the projector placed on
the table in front of the screen. This is the most
common way to position the projector for quick
setup and portability.
3. Front Ceiling
Select this location with the projector suspended
upside-down in front of the screen. Purchase the
BenQ Projector Ceiling/Wall Mount Kit from your
dealer to mount your projector.
After turning on the projector, go to Advanced menu - Installation Menu > Projector Position
and press / to select a setting.
Projection dimensions on page 12
2. Rear Table
Select this location with the projector placed on
the table behind the screen. Note that a special
rear projection screen is required.
4. Rear Ceiling
Select this location with the projector suspended
upside-down from behind the screen. Note that a
special rear projection screen and the BenQ
Projector Ceiling/Wall Mount Kit are required for
this installation location.
can help decide exact
Positioning your projector 11