Table of Contents
Advertisement
Routing the Cables
Cable Mounts
The CVX 600 chassis includes plastic cable mounts that you can use to position
the cables, using cable ties (not supplied), around the chassis. These mounts help
to ensure that the cables at the back of the chassis do not obstruct airflow and do
not obstruct the removal of LTMs and RLTMs.
Suggested Use
Typically, the cable mounts on the left are used to route communications cables,
while the one on the lower right is used to route power cables.
Locations of Cable Mounts
The following figure shows the location of the cable mounts.
296-1011-202 Rel. 5.0, Doc. Rev. 02.01
AC PM 2
PDU 2 DC INPUT B
1
2
3
4
5
System
Controller
only
6
Chassis Connections
Routing the Cables
AC PM 1
PDU 1 DC INPUT A
1
2
Main Chassis
3
4
5
6
CVX-0229A
2-27
Advertisement
Table of Contents
