Table of Contents
Advertisement
Change Web passwords using the command:
4.
config web-server set password ro <username> <passwd>
where:
<username>
<passwd>
long.
To enable or disable Telnet access, you set flags from the boot monitor CLI. You
can access the boot monitor CLI while the switch is booting.
To set up Telnet access:
While the switch is booting, press any key to interrupt the autoboot
1.
process.
Enable or disable Telnet access using the command:
2.
flags telnetd <true|false>
where:
true
false
204515-C
is the user's login name, up to 20 characters long.
is the password associated with the login name, up to 20 characters
enables Telnet access.
disables Telnet access.
Basic Switch Configuration
3-7
Advertisement
Table of Contents
