Table B-4. Module Leds On The Passport 8108Gbic Module - Nortel 1000BASE-XD Using Manual

Fault
Master
Online
1
1 = Module LEDs
2 = Port Link and Activity LEDs
Figure B-3.
Table B-4. Module LEDs on the Passport 8108GBIC Module
Label Color/State
Fault Yellow/Steady
Yellow/Blinking
Off
Master Green/Steady
Yellow/Steady
Off
Online Off
Amber/Steady
Green/Steady
Table B-5.
Label
Activity
Link
204515-C
1 8
LEDs on the Passport 8108GBIC Module
Meaning
A diagnostics failure or hardware failure has been detected.
A chassis failure has been detected.
The system is functioning normally.
This module is properly generating the system clock for the switch.
This module has detected system clock generation failure on its own circuitry.
This module is not providing the system clock for the switch. You can pull this
module out of the chassis without resetting the switch.
The switch power is off.
Or
The power has been turned on, and the module is going through its power-on
self-test and software initialization. A module in this state is not yet functional.
The module failed its power-on self-test.
The module has completed its power-on self-test and software initialization and
is operating normally.
Port LEDs on the Passport 8108GBIC Module
Color/State Meaning
Green The port is transmitting data.
Off No data activity is occurring.
Off The port has no link.
Green The port has link and is enabled.
8108GBIC
1 2 3 4 5 6 7 8
Link
Act
2
9682EA
LEDs
B-5