Fitting The Harness; Switching On; Switching Off - Stihl HTE 60 Instruction Manual

English

Fitting the Harness

A shoulder strap may be used if required
(special accessory).
The type and style of the shoulder strap
depend on the market.
Shoulder strap
2
Put on the shoulder strap (1).
N
Adjust the length of the strap so that
N
the spring hook (2) is level with your
right hip when the machine is
attached.
46

Switching On

1
Make sure you have a secure and
N
balanced footing.
Hold the unit with both hands – right
N
hand on the handle housing – left
hand on the drive tube.
Stand upright – hold the unit in a
N
relaxed position and always on right
side of your body.
Do not rest the saw chain and guide
N
bar on the ground.
Press down the starting lockout
N
lever (1) and hold it in that position.
Squeeze the trigger switch (2).
N
1
2

Switching Off

Release the trigger switch and
N
starting lockout lever.
Note that the chain continues to
run for a short period after you let
go of the trigger switch and
starting lockout lever – flywheel
effect.
During longer work breaks – disconnect
the plug from the wall outlet.
When the power tool is not in use, store
it in such a way that it does not endanger
others.
Secure it against unauthorized use.
HTE 60