Stihl HTE 60 Instruction Manual page 62

English
f) Dress properly. Do not wear
loose clothing or jewellery. Keep
your hair, clothing and gloves
away from moving parts. Loose
clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for
connection of dust extraction
and -collection facilities, ensure
these are connected and properly
used. Use of dust collection can
reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the
power source and/or the battery
pack from the power tool before
making any adjustments,
changing accessories, or storing
power tools. Such preventive
safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the
reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
60
e) Maintain power tools. Check for
misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the power tool's operation.
If damaged, have the power tool
repaired before use. Many
accidents are caused by poorly
maintained power tools.
f) Keep cutting attachments sharp
and clean. Properly maintained
cutting attachments with sharp
cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories,
tool bits etc. in accordance with
these instructions, taking into
account the working conditions
and the work to be performed.
Use of the power tool for operations
different from those intended could
result in a hazardous situation.
5) Service
a) Have your electric power tool
serviced by a qualified repair
person using only original
replacement parts. This will
ensure that the safety of the power
tool is maintained.
Chain saw safety warnings
– Keep all parts of the body away
from the saw chain when the
chain saw is operating, make
sure the saw chain is not
contacting anything. A moment of
inattention while operating chain
saws may cause entanglement of
your clothing or body with the chain
saw.
– Always hold the chain saw with
your right hand on the rear
handle and your left hand on the
front handle. Holding the chain saw
with a reversed hand configuration
increases the risk of personal injury
and should never be done.
– Always hold your electric power
tool by the insulated handles
because the saw chain may
contact hidden electrical wires or
your own power cord. Any saw
chain contact with a live wire may
energize metallic parts of the power
tool and result in an electric shock.
– Wear safety glasses and hearing
protection. Further protective
equipment for head, hands, legs
and feet is recommended.
Adequate protective clothing will
reduce personal injury by flying
debris or accidental contact with the
saw chain.
– Do not operate a chain saw in a
tree. Operation of a chain saw while
up in a tree may result in personal
injury.
HTE 60