Redial List - Nortel 2002 User Manual

Redial List

The Redial List feature logs all outgoing calls. Redial List can store up to
20 entries in the list. When the list is full, the system over-writes the oldest
entry. Use the Redial List feature to review calls made and to redial
previously dialed calls. The Redial List contains:
• the last and first name of the dialed party (if available)
• the DN of the dialed party
• the time/date of the last dialed occurrence
Entries in the Redial List are sorted by the time the call was received.
Note: Calling Party Name Display (CPND) is affected depending on
the preferred name match option. If preferred name match is on, the
CPND appears according to your settings. If the preferred name
match option is off, the CPND appears according to the system
settings.
To access Redial List, press the Directory key and select Redial List.
Note: If password control has been enabled, enter your SCPW at the
prompt.
To dial an entry:
1. Press the Up/Down
scroll and highlight the desired entry.
2. Press the Dial
Additional features
navigation keys to
key.
117