Show Radius - D-Link X-STACK DES-3200 SERIES Reference Manual

®
xStack DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
retransmit - (Optional) The count for re-transmitting. The default value is 2.
<int 1-20> - Enter the re-transmit value here. This value must be between 1 and 20.
default - Specify that the default re-transmit value will be used.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure a radius server:
DES-3200-28P:admin#config radius 1 auth_port 60
Command: config radius 1 auth_port 60
Success.
DES-3200-28P:admin#
4-24

show radius

Description
This command is used to display RADIUS server configurations.
Format
show radius
Parameters
None.
Restrictions
None.
Example
To display RADIUS server configurations:
53