D-Link X-STACK DES-3200 SERIES Reference Manual page 309

®
xStack DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
<vlan_name> - Enter the VLAN name here.
vlanid - Specify the VLAN ID.
<vlanid_list> - Enter the VLAN ID list here.
<ipv6addr> - Specify the group's IP address learned by data driven.
all - Specify to clear all data driven groups of the specified VLAN.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear all the groups learned by data-driven:
DES-3200-28P:admin#clear mld_snooping data_driven_group all
Command: clear mld_snooping data_driven_group all
Success.
DES-3200-28P:admin#
30-41 show mld_snooping statistic counter
Description
This command is used to display the statistics counter for MLD protocol packets that are received
by the Switch since MLD snooping was enabled.
Format
show mld_snooping statistic counter [vlan <vlan_name> | vlanid <vlanid_list> | ports
<portlist>]
Parameters
vlan - Specify a VLAN to be displayed.
<vlan_name> - Enter the VLAN name here.
vlanid - Specify a list of VLANs to be displayed.
<vlanid_list> - Enter the VLAN ID list here.
ports - Specify a list of ports to be displayed.
<portlist> - Enter the list of port here.
Restrictions
None.
Example
To show MLD snooping statistics counters:
305