D-Link X-STACK DES-3200 SERIES Reference Manual page 148

®
xStack DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
DES-3200-28P:admin#show config modified
Command: show config modified
#-------------------------------------------------------------------------------
#
#
#
#
# Copyright(C) 2012 D-Link Corporation. All rights reserved.
#-------------------------------------------------------------------------------
# DEVICE
# BASIC
# ACCOUNT LIST
create account admin admin
admin
admin
CTRL+C ESC q Quit SPACE n
15-2 config configuration
Description
This command is used to select a configuration file as the next boot up configuration or to apply a
specific configuration to the system. This command is required when multiple configuration files
are supported.
Note: DES-3200 Series with C1 hardware version support file system.
Format
config configuration <pathname 64> [boot_up | active]
Parameters
<pathname 64> - Specify a configuration file on the device file system.
boot_up - Specify it as a boot up file.
active - Specify to apply the configuration.
Restrictions
Only Administrator-level users can issue this command.
DES-3200-28P Fast Ethernet Switch
Configuration
Firmware: Build 4.03.004
Next Page ENTER
144
Next Entry a All