D-Link X-STACK DES-3200 SERIES Reference Manual page 553
Hide thumbs
Also See for X-STACK DES-3200 SERIES:
- Reference manual (531 pages) ,
- Installation manual (68 pages) ,
- Hardware installation manual (60 pages)
Table of Contents
Advertisement
®
xStack
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
63-23 enable snmp traps
Description
This command is used to enable SNMP trap support.
Format
enable snmp traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable SNMP trap support:
DES-3200-28P:admin#enable snmp traps
Command: enable snmp traps
Success.
DES-3200-28P:admin#
63-24 disable snmp traps
Description
This command is used to disable SNMP trap support on the Switch.
Format
disable snmp traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To prevent SNMP traps from being sent from the Switch:
549
Advertisement
Chapters
Table of Contents
