D-Link X-STACK DES-3200 SERIES Reference Manual page 288

®
xStack DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
<vlanid_list> - Enter the VLAN ID list here.
If no parameter is specified, the system will display all current IGMP snooping forwarding table
entries of the Switch.
Restrictions
None.
Example
To show all IGMP snooping forwarding entries located on the Switch:
DES-3200-28P:admin#show igmp_snooping forwarding
Command: show igmp_snooping forwarding
VLAN Name : default
Source IP : *
Multicast Group: 225.0.0.0
Port Member : 2,7
VLAN Name : default
Source IP : *
Multicast Group: 225.0.0.1
Port Member : 2,5
VLAN Name : default
Source IP : *
Multicast Group: 225.0.0.2
Port Member : 2,8
Total Entries : 3
DES-3200-28P:admin#
30-20 show router_ports
Description
This command is used to display the currently configured router ports on the Switch.
Format
show router_ports [vlan <vlan_name 32> | vlanid <vlanid_list> | all ] {[static | dynamic |
forbidden]}
Parameters
vlan - Specify the name of the VLAN on which the router port resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - Specify the ID of the VLAN on which the router port resides.
<vlanid_list> - Enter the VLAN ID list here.
284