D-Link X-STACK DES-3200 SERIES Reference Manual page 34

®
xStack DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
3-11 show port_vlan
Description
This command is used to display the ports' VLAN attributes on the Switch.
Format
show port_vlan {<portlist>}
Parameters
<portlist> - (Optional) Specify a range of ports to be displayed.
If no parameter specified, system will display all ports gvrp information.
Restrictions
None.
Example
To display 802.1Q port setting:
DES-3200-28P:admin#show port_vlan
Command: show port_vlan
Port PVID GVRP
------- ---- --------
1 2 Enabled
2 2 Enabled
3 2 Enabled
4 2 Enabled
5 2 Enabled
6 1 Disabled
7 1 Disabled
8 1 Disabled
9 1 Disabled
10 1 Disabled
11 1 Disabled
12 1 Disabled
13 1 Disabled
14 1 Disabled
15 1 Disabled
16 1 Disabled
17 1 Disabled
18 1 Disabled
19 1 Disabled
20 1 Disabled
CTRL+C ESC q Quit
Ingress Checking
----------------
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
SPACE n Next Page ENTER
Acceptable Frame Type
---------------------------
Only VLAN-tagged Frames
Only VLAN-tagged Frames
Only VLAN-tagged Frames
Only VLAN-tagged Frames
Only VLAN-tagged Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
Next Entry a All
30