D-Link X-STACK DES-3200 SERIES Reference Manual page 476

®
xStack DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
53-3 show poe system
Description
This command is used to display the setting and actual values of the whole PoE system.
Format
show poe system
Parameters
None.
Restrictions
None.
Example
To display PoE system:
DES-3200-28P:admin#show poe system
Command: show poe system
PoE System Information
---------------------------------------------------
Power Limit
Power Consumption
Power Remained
Power Disconnection Method : Deny Next Port
Detection Legacy PD
If Power Disconnection Method is set to deny next port, then the system can not
utilize out of its maximum power capacity. The maximum unused watt is 19W.
CTRL+C ESC q Quit
53-4 show poe ports
Description
This command is used to display the setting and actual values of PoE port.
Format
show poe ports {<portlist>}
: 188(Watts)
: 0(Watts)
: 169(Watts)
: Disabled
SPACE n Next Page p
472
Previous Page r Refresh