Table of Contents
Advertisement
HOW TO CREATE A CUSTOM PROGRAM
mnsert the key into the console.
See HOW TO TURN ON THE POWER on page
12,
identify yourself
as user A, B, C, or D.
See step 2 on page 12,
Select one of the custom programs.
To sebct a
custom pro-
RR_
gram, press
Progra,,,_
the
Programs
button re-
_ ,,,-,e,,
n
peatedUy
until the
words "My
Design" and the number "1" or "2" appear in the
dispUay,
Note: if the custom
program
has not yet been
defined, onJy three columns
of indicators
writ
scroll across the matrix in the center of the
display.
If more than three columns
of indica-
tors appear, see HOW TO USE A CUSTOM
PROGRAM on page 18.
Press the Start button or the Speed increase
button and program
the desired
speed and in-
cline settings.
A moment after the button is pressed, the walking
belt will begin to move, Hold the handrails and
begin walking,
Refer to the
matrix, Each
,,,,,
custom pro-
m,_
gram is di-
_o"
P_o_ .......
vided into
one-minute
segments,
One speed setting and one incline setting can be
programmed for each segment, The speed setting
for the first segment will be shown in the flashing
Current Segment column of the matrix, (The in-
cline settings are not shown in the matrix,) To pro-
gram a speed setting and an incline setting for the
first segment, simply adjust the speed and incUine
of the treadmill as desired by pressing the Speed
and Incline buttons, Every few times a Speed but-
ton is pressed, an additional indicator will appear
or disappear in the Current Segment column,
When the first segment of the program ends, a se-
ries of tones wiii sound and the current speed set-
ting and the current incline setting will be saved in
memory, The three columns of indicators wi// then
move one column to the left, and the speed set-
ting for the second segment will be shown in the
flashing Current Segment column, Program a
speed setting and an incline setting for the second
segment as described above,
Continue programming speed and incline settings
for as many segments as desired; custom pro-
grams can have up to forty segments, When you
are finished with your workout, press the Stop but-
ton twice, The speed and incline settings that you
have programmed and the number of segments
that you have programmed wiii then be saved in
memory,
When you are finished
exercising,
remove the
key from the consote.
See step 10 on page 16,
17
Advertisement
Table of Contents
