Table of Contents
Advertisement
(c) Power On：
User can press Keypad Power to turn on projector. User can also use IR remote controller and
RS-232 Command：<CR>*pow=on#<CR> to do this action. When system turning on, power LED
will flash Green as the figure shown below.
(d) Power Off：
If user wants to turn off projector, user can double click keypad Power, use IR remote controller,
or RS-232 Command：<CR>*pow=off#<CR>. Then, system will cool itself via fans for 3 seconds
(quick cooling) or 90 seconds (normal). During cooling, Power LED will flash Orange. After cooling,
system will return to standby mode and Power LED will become Orange as the figure shown
below.
(e) EDID Download mode：
To relief PC/ HDMI EDID write protect function:
1. Press Power+Source on keypad then plug in power cord.
2. EDID can be downloaded to EEPROM by Q-EDID tools.
Power On
EDID Download mode
Power Off
48
Hide quick links:
Advertisement
Table of Contents
