Appendix 2 - Code List: Ir / Rs232 / Ddc Data - BenQ SX930 Service Manual

Appendix 2 - Code List: IR / RS232 / DDC Data

Remote Control Code:
1.
(projector must support 0x02,0X4E,0X4F power on/off command)
Key Function
1 Wireless
2
Power
3
Freeze
4
Source
5
Page Up
6
Page Down
7 Eco Blank
8
Auto
9 Keystone +
10 Keystone -
11 Up
12 Down
13
Left
14 Right
15
Menu/Exit
16 Mode
17 Contrast
18 SWAP
19 Aspect
IR Code
Description
This button will on/off the projector.
This button will freeze/ unfreeze the
image.
This button will show available source
options.
By pressing "Page Up" button, could
enable Page Up function.
By pressing "Page Down" button, could
enable Page Down function.
This button will turn projector into/out
of blank mode.
This button will automatically adjust
projector's picture quality.
When there is no OSD on screen, this
button will correct optical keystone in
negative direction.
When there is OSD menu on screen, this
button will move the chooser item to
the upper one.
When there is no OSD on screen, this
button will correct optical keystone in
positive direction.
When there is OSD menu on the screen,
this button will move the chooser item
to the next one.
When there is no OSD on screen, this
button will correct optical keystone in
positive direction.
When there is OSD menu on screen, this
button will move the chooser item to
the left one.
When there is no OSD on screen, this
button will correct optical keystone in
positive direction.
When there is OSD menu on screen,
This button will move the chooser item
to the right one.
This button will turn on/off OSD menu.
When there is no OSD menu on the
screen, the button will change picture
mode.
When there is OSD menu on the screen,
this button will excite the item chooser.
Displays the CONTRAST setting bar.
Select the display aspect ratios.
Code Suppor
0x00 No
0x02 No
0x03 Yes
Yes
0x04
No
0x05
No
0x06
0x07 Yes
0x08 Yes
0x09 No
0x0A No
0x0B Yes
0x0C Yes
0x0D Yes
0x0E Yes
0x0F Yes
0x10 Yes
0x11 Yes
0x12 No
0x13 Yes
147
ID and Protocol
t
Frequency 38 KHz
Protocol NEC Format
Custom 0x0030
Code