BenQ SX930 Service Manual page 10

3.13 Light Leakage out of AA
3.14 Ghost
3.15 Defect
(Color Band, Dark Corner,
Dark band)
3.16 Preset mode setting
4.Lamp Specification
4.1 Lamp
4.2 Lamp Sync Type
4.3 Lamp Flick
4.4 Lamp Power
5. Mechanical Specification
5.1 Color & Texture specifications
5.2 Physical Dimensions(Width X
Depth X Height)
5.3 Net Weight
5.4 Security Slot
5.5 Lens Cover
5.6 Adjustment Feet
5.7 Ceiling Mounting
5.8 Screws
5.9 During PVT stage, limited sample
of color and texture should be
approved by BenQ industrial
designer and mechanical
engineer.
5.10 Packaging
Cushion Material
6. Thermal Specification
Mechanical component temperature at ambience 0~40℃
6.1 Surface held or touched for short
periods
6.2 Surface which my be touched
6.3 Exhaust Air
6.4 Audible Noise Level
not included. (Except DMD Defect)
≦1 lux, @ full black pattern with 60"~80"
≦3 lux, @ out of full black pattern with diagonal 80~120"
≦20 lux, @ out of full black pattern with diagonal >120"
(Except DMD Defect and high zoom ex: D zoom /zoom5 /
B zoom )
Ghost (Confirm at EVT2 stage)
Follow limited sample (When needed).
USHIO NSH465W E22.7
AC Lamp
Follow limited sample (When needed).
Normal Mode
ECO Mode
Image-care or equivalent
Refer to ID document for details
446*336*152(mm)
≦8.5kg
Kensington compatible slot 20Kg break away force
Detached lens cover
Adjustable foot in front, rubber foot in rear.
Front/ Rear foot
Tilt: 0-4.5∘,
Right/Left: +4.0∘/-4.0∘
Match BenQ's ceiling mount required.
Use the same mounting as current shipping projectors.
All color of screws should similar with the plastic color which
close it.
N/A
EPE
Normal surface:
Metal< 60 ℃ Plastic< 85 ℃
Bottom surface @25℃
Metal< 55 ℃ Plastic< 70 ℃
Metal
< 70 ℃
< 95 ℃
Normal mode: 39dBA @ 25°C(table center)
Typical
Eco mode: 36dBA @ 25°C(table center)
10
440W -> 425W
360W
NA
Plastic
< 95 ℃