BenQ SX930 Service Manual page 13

12.10 Smart ECO*
12.11 Off-line cooling
13.0 Green Eco design
13.1BenQ ecoFACTS
Note: Follow USHIO Lamp Operating.
1. When the image is in Eco Blank mode and user done:
(1) Press any Keypad
(2) Press IR
The projector would turn off Eco Blank mode
The lamp power will back to original mode power
Turn on Lamp Saver:
1. When there is no signal input and didn't do any projector
operation last to 3 mins, a full black pattern will be
displayed with "No signal" and other message
The lamp power will dim to Eco Blank (follow Lamp
Capability).
Turn off Lamp Saver:
1. When the image is in Lamp Saver mode and user done:
(1) Press any Keypad
(2) Input Signal
(3) Press IR
The projector would turn off Lamp Saver mode
The lamp power will back to original mode power
NA
NA
Refer to BenQ ecoFACTS Checkinglist
13