G. Assemble "LENS SHIFT PLATE" and screw Well. (Fig. 6-7)
7. Assembly Lens
A.
Assemble "Lens" and lock with screws well
i.
Assemble Lens and the Assembly direction must be horizontal,and do not impact CM.
(Fig. 7-1)
ii.
Pre-fastening Spring Screws firstly. Screw Torque must be confirmed to be 1-2 kg-cm. (Fig.
7-2)
iii.
Fastening the Spring Screws well. Screw Torque must be confirmed to be 6.0-7.0 kg-cm.
(Fig. 7-2)
iv.
Fastening the M2 Screws well with "HOLDER ADAPTER"
LENS SHIFT PLATE
Fig.6-6
M3 Screw
Fig. 6-7
115
.