Remote Setting; Remote System Setting; If The Vcd Series Is Connected To A Network, Some Of The System Settings Can Be Changed From; Remote Sites , Using The - Digimerge VCD304161 Installation And User Manual

70

6. Remote Setting

6.1

Remote System Setting.

If the VCD series is connected to a network, some of the system settings can be changed from

remote sites, using the Internet Explorer web browser. Enter the IP address of the VCD series
DVR followed by " :2000" in the address bar of Internet Explorer. Port 2000 is the default port.
Note: If you are using firmware version 1.21 and above you can assign any web port to your network settings.
Examples:
LAN IP address of DVR: 192.168.45.37
Type on the Internet Explorer address bar:
Public/WAN IP address of DVR/site: 205.207.126.241
Type in the Internet Explorer address bar:
The picture below is first screen that appears for the system's remote settings.
The screen will be slightly different, according to the user window environment.
Note The remote setting function will not activate when the local system is showing the [Setting] menu or while it is
upgrading. Note, there can be a problem if the local system is operated while remote setting.
http://192.168.45.37:2000
http://205.207.126.241:2000