10
3. Installation
3.1
Connecting Peripheral Devices
This section describes how to efficiently hook up peripheral devices using with the VCD series. Below is a
picture showing the connection for the VCD series with the peripheral devices.
Install the VCD series on a flat surface. If required, attach a rubber mount for installation. If a 19-inch rack is used, it
is recommended to install the system on shelve and use 2.5~3U(1U=1.75 inch or 4.45 cm) space for proper
ventilation.
Note
Install the system in location with good ventilation to prevent overheating.
Depending on the grounding, if the coaxial cable connecting to the camera has any risk or danger of electric
Caution
shock,. shutdown the power on the system completely (unplug the power cable) before connecting video
cable to BNC port.