Table of Contents
Advertisement
48
5.10
Camera-Schedule
Set the recording schedule for each camera. Select the camera to set the schedule.
The following picture shows the status of schedule setup for all cameras. The number indicates the time.
Recording schedule can be set per hour. The "initial" indicates the status of recording. The status of recording will be
displayed on the upper right of each channel when the live channel is seen.
The contents for each initial is as following.
1)
c: Continuous : Continuous recording
2)
m: Motion detection : Motion detection recording
3)
a: Alarm-activated : Alarm-activated recording
4)
ca : Continuous + Alarm-activated recording
5)
ma : Motion detection + Alarm-activated recording
6)
cm: Continuous + Motion detection recording
Note
1.
If the recording is done with ca or ma, the recording will be recorded in continuous or in motion detection.
When the alarm activates, concentrated recording will be done according to the set IPS on the alarm.
2.
If cm recording is done, the motion alarm must be turned On in order to record at the IPS set in the
motion alarm menu (Setup Alarm Motion Alarm). See Appendix II 8.5 for details.
Advertisement
Table of Contents
