Ready Screen - Kodak i5x50 User Manual

Ready screen

3-14
The Ready screen provides a list of options that can be selected. In addition,
the counter value is displayed in the status area at the top of the screen.
Following are the icons that may be displayed in the status area.
The counter value will start at 0 and be incremented with
each page scanned. The maximum value that will be
displayed is 999,999,999.
If the User Counter option is On, then the counter value is
followed by the Document counter icon or the User counter
icon to indicate which counter value is being displayed.
Indicates that the Document counter is being displayed.
Indicates that the User counter is being displayed.
For the i5850 Scanner only: indicates that batching is
enabled.
Indicates an Application Override is enabled.
Indicates that documents are in the input elevator and the
scanner will scan from the input elevator.
Indicates that no documents are in the input elevator.
Indicates that the rear exit is open and there are no
documents in the input elevator.
Indicates that the rear exit is open and documents are in the
input elevator.
Indicates a consumable needs to be replaced or attended to.
See the section entitled, "Maintenance meters" later in this
chapter.
Indicates an informational message. For example, No paper
in input elevator. These messages are easily corrected by
the operator.
Indicates a recoverable error condition. For example, Input
elevator full or feed module missing or broken.
Indicates an error state. For example, paper may be in the
transport, or imaging guides may not be installed correctly.
A-61845 January 2016