Kodak i5x50 User Manual page 43

Performing a Self Test
Count Only
A-61845 January 2016
The scanner Self Test will test the image capture subsystem to ensure that it is
functioning correctly.
You may want to count the number of documents entering the scanner without
actually scanning them.
1. Select Count Only. The Count Only screen will be displayed.
2. Place the documents you want to count in the input elevator.
3. Press the Start/Resume button. When the scanner has scanned all
documents, the total number will be displayed.
4. Touch Cancel to return to the Ready screen.
NOTES:
• When you press the Stop/Pause button, the feeder and transport will stop.
You can continue your Count only test by pressing the Start/Resume
button.
• In Count only mode, Document Handling will default to Improved Stacking.
• Multifeed Detection is not enabled in Count only mode.
3-21