System Requirements - Kodak i5x50 User Manual

Power Consumption -
Scanner
Acoustic Noise
(Sound Pressure level at
Operator Position)
Electrical rating

System requirements

A-2
Idle - not imaging: <115 watts (all models)
Running - imaging:
<215 watts (i5250/i5650/i5250V/i5650V Scanners)
<250 watts (i5850 Scanner)
Low Power mode: <4 watts
Standby: <1.0 watts
Scanning: less than 67 dB(A)
Standby: less than 42.3 dB(A)
i5250/i5650/i5250V/i5650V: 1/N/PE ~ 100 -240 VAC 2.8 - 1.5A 50/60 Hz
i5850: 1/N/PE ~ 100 -240 VAC 3.3 - 1.5A 50/60 Hz
Following is the recommended system configuration to run Kodak i5x50
Scanners.
For i5250/i5650/i5850 Scanners
• PC: Intel® Core™ i5 (Sandy Bridge or newer) running at 2.7 GHz or
higher; USB 3.0 (Super Speed) or 2.0 (High Speed); 4 GB RAM or
more
For i5250V/i5650V Scanners
• PC: Intel® Core™ Quad, 3GHz, 4 GB RAM, USB 2.0 or higher
Supported operating systems:
• Microsoft Windows XP, SP3 (TWAIN Datasource only)
• Microsoft Windows Vista; SP1
• Microsoft Windows Vista x64 Edition
• Microsoft Windows 7 (32- and 64-bit)
• Microsoft Windows 8 (32- and 64-bit)
• Microsoft Windows 8.1 (32- and 64-bit)
• Microsoft Windows 10 (32- and 64-bit)
Included Drivers:
• Windows operating systems: TWAIN, ISIS, WIA
VRS (for Kodak i5250V and i5650V Scanners only)
A-61845 January 2016