Selecting the sound
Units
3-32
You can select the sound you want the scanner to make when a particular
scanner condition is encountered such as, document jam or multifeed, etc.
1. Select Sounds to display the Sounds screen.
2. Select the event (e.g., Warning, Error, etc.) that you want a tone to be set
for. When you select an Event, another screen will be displayed listing a
variety of different sounds that you can choose from.
3. Select the type of sound you want to hear. A tone will sound with each
selection.
4. Return to the Sounds screen to set other sounds for other events by
repeating Steps 2 and 3.
5. Touch OK to save your selection and return to the Settings screen; or
touch Cancel to return to the Settings screen without saving your changes.
The Units option is used to select the unit of measurement used in the Print
Offset option. Select either English (for inches) or Metric (for millimeters) and
touch OK to save your changes or Cancel to return to the Settings window
without saving your changes.
A-61845 January 2016