Kodak i5x50 User Manual page 12

Front view: i5850 Scanner
1-6
In addition to the components listed previously, the Kodak i5850 Scanner also
has a workspace height adjustment switch which is used to raise and lower the
workspace table on the scanner. The workspace table can be raised or
lowered approximately 10 inches up or down.
Gap release
toggle switch
There are four castors and four leveling feet on the bottom of the scanner. If
you need to move the scanner, the leveling feet must be raised. Contact
Technical Support before attempting to relocate the scanne
Height adjustment
switch
Castors
Leveling
feet
r.
A-61845 January 2016