Multiple Users; Getting Your Scanner Ready To Scan - Kodak ScanMate i1150WN User Manual

3 Scanning
Contents

Multiple users

Getting your scanner
ready to scan
A-61854 April 2016
Multiple users.................................................................................. 3-1
Getting your scanner ready to scan ................................................ 3-1
Getting your documents ready to scan ........................................... 3-2
Scanning applications ..................................................................... 3-3
Scanning with Smart Touch ............................................................ 3-4
When a scanner is being shared by more than one user, there could be
times when the scanner will be in use by someone else. When this is
the case, a message will be displayed on your computer that the
scanner is currently in use and the Operator Control Panel on the
scanner will display the message In use by XXXXX (where XXXX is the
users name or other identifier). Wait until the scanner is available and
try again.
1. Be sure the scanner is on and ready to scan (Power button will be
green and constant).
2. Adjust the side guides (by sliding them in or out) to accommodate
the size of documents you are scanning.
3. If necessary, adjust the input and output trays to accommodate your
scanning needs. The output tray can be extended to accommodate
documents up to 35.56 cm (14 inches) in length. An end stop is
available to accommodate document stacking. Lift this end stop as
needed for scanning documents up to A4 (11.7 inches).
3-1