Adjusting Output Speed in the Rotate Collate Mode
Printing with the Rotate Collate mode involves two different paper sources, and a certain wait
time is required to switch them. You can make this wait time shorter or longer by selecting
whether to give priority to the speed or image quality.
NOTE
The default setting is 'Speed Priority 1'.
1
4
2
3
4-82
Cleaning and Adjusting the Machine
(Additional Functions) ➞ [Adjustment/Cleaning].
Press
If necessary, see the screen shot in step 1 of "Improving Print Quality and Density (Special
Mode M)," on p. 4-70.
Press [▼] or [▲] until [Rotate Collate Adjustment] appears ➞ press
[Rotate Collate Adjustment].
Select [Speed Priority 1], [Speed Priority 2], or [Image Priority] ➞ press
[OK].