TP-Link archer c50 User Manual page 82

Chapter 11
4. Set the time. Drag the cursor to cover the time area and click Save to make the
settings effective. The selected time will be in red.
5. Repeat steps 3 and 4 to set time for 5GHz wireless network.
Note:
1. If you just set time for one wireless band, the other wireless band is still always on, so set time for both of the two
bands to schedule your whole wireless network.
2. The wireless LED (2.4GHz , 5GHz ) will turn off if the corresponding wireless network is disabled.
3. The wireless network will be automatically turned on after the time period you set.
78