TP-Link archer c50 User Manual page 24

Chapter 4
5. Click Save to make the settings take effect. To check your Internet connection, click
Network Map on the left of the page.
Note:
It may take 1-2 minutes to make the settings valid.
6. After the connection succeed, the screen will display as follows. Here we take PPPoE
as an example.
Tips:
1. If your Internet connection type is
2. If you use Dynamic IP and
please go to Advanced >
3. If you still cannot connect to the Internet, refer to
Bigpond Cable, please go to
PPPoE and you are provided any other parameters that are not required on the page,
Network > Internet to complete the configuration.
FAQ
Advanced > Network
for further instructions.
> Internet.
20