TP-Link archer c50 User Manual page 102

2 ) Clicking on
itself.
• On Windows XP
1 ) If you see the message
is usually because windows configuration utility is disabled or you are running
another wireless configuration tool to connect the wireless;
2 ) Exit the wireless configuration tool( the TP-LINK Utility, for example);
3 ) Select and right click on
Computer Management window;
4 ) Expand Services and Applications
Configuration
5 ) Right click Wireless Zero
6 ) Change Startup type
Service status is Started. And then click OK;
7 ) Connect to wireless network.
If you can find other wireless network except your own, please follow the steps
below:
1. Check the WLAN LED indicator on your wireless router/modem;
2. Make sure your computer/device is still in the range of your router/modem, move
closer if it is currently too far away;
3. Go to Advanced >
double check your Wireless Network Name, make sure the wireless is not hided;
Troubleshoot and windows might be able to fix the problem by
Windows cannot configure this wireless
My Computer
in the Services list on the right side;
Configuration, and then select Properties;
to Automatic, click on Start button and make sure the
Wireless > Wireless Settings, and check the wireless router settings,
on desktop, select
> Services, find and locate
connection, this
Manage to open
Wireless Zero
98