TP-Link archer c50 User Manual page 22

Chapter 4
Follow the steps below to check or modify your Internet connection settings.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Basic > Internet
3. Select your Internet connection type from the drop-down list.
Note:
If you are unsure what your connection type is, click
cables and connection information, you can also refer to the demonstrations in Step 4 to judge your connection
type.
4. Follow the instructions on the page to continue the configuration. Parameters on the
figures are just used for demonstration.
1 ) If you choose
Dynamic IP users are usually equipped with cable TV or fiber cable.
2 ) If you choose
corresponding fields.
on the left to enter the setting page.
Auto
Dynamic IP, you need to select whether to clone the MAC address.
Static IP, enter the information provided by your ISP in the
Detect. Since different connection types need different
18