TP-Link archer c50 User Manual page 72

Chapter 11
How can
I do that?
Done!
For example, I already bought IPTV service, but this service can
only be delivered through the Internet. Therefore, I need to
configure my router first.
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to Advanced >
page.
3. Configure IPTV settings:
1 ) Select the Enable IPTV
2 ) Select the appropriate
Bridge if your ISP is not listed and no other parameters
are required, and then skip to substep 4. Select
your ISP is not listed but provides necessary parameters.
3 ) After you have selected a mode, the necessary parameters
are predetermined. You can perform other configuration,
e.g. enter the
Multicast VLAN Priority
ISP.
elect the IGMP Proxy
4 ) S
to the information provided by your ISP.
5 ) For Russia,
and Malaysia-Maxis mode, connect device to the
predetermined LAN port. For Bridge and Custom mode,
select a LAN port as the IPTV port and connect the set-
top box to the corresponding port.
6 ) Click Save.
Your IPTV setup is done now! You may need other configurations
Network > IPTV to open the configuration
check box.
Mode according to your ISP. Select
IPTV Multicast VLAN ID
in Russia mode according to your
version, either V2 or V3, according
Singapore-ExStream,
Custom if
and select the IPTV
Malaysia-Unifi
68