TP-Link archer c50 User Manual page 104

2. Configure the LAN IP address
For example, the IP address of the root router is 192.168.0.1, the IP address of the
extended router should be from 192.168.0.2 to 192.168.0.254.).
3. Go to Advanced >
4. Select the check box to enable the WDS Bridging function.
5. Click Survey to scan all the AP devices and choose the root AP to be bridged.
6. Click the connect icon and then the SSID and MAC will be automatically filled in.
Configure the Security settings as the AP you choose to be bridged.
of the router in the same subnet as the root router.
System Tools > System Parameters page and locate the WDS section.
100