Table of Contents
Advertisement
Using Sets
Import All FR-7x Sets from an Optional
USB memory
IMPORTANT NOTE
FR-7x SETs that you import are converted in User Program
memories.
Be careful when you import SETs do not overwrite User
Program memories that you need.
Always check the contents of the User Program memories
before deciding to overwrite them.
1.
Insert into the FR-8x USB port an optional USB memory
that contains data to import.
2.
Press the [MENU] button and use the [DATA/ENTER] knob
to select the following page:
For more information about how to navigate see
"Selecting Parameters Via the Menu" (p. 68).
3.
Rotate the [DATA/ENTER] knob to select the "Type" field
and push it.
4.
Rotate the [DATA/ENTER] knob to select "FR-7x All SET's"
and push it.
The display changes as follows:
5.
Press the [MENU/WRITE] button.
The display shows the root folder of the USB memory.
To open an existing folder, select it by rotating the [DATA/ENTER]
knob, then press the [DATA/ENTER] knob. Press the [EXIT/JUMP]
button to return to a higher level (i.e. leave the current folder).
6.
Rotate the [DATA/ENTER] knob to select a file with "FRS"
extension.
46
7.
Press the [MENU/WRITE] button to proceed.
The display shows the operation is in progress. A confirmation
message is shown to indicate that the import function has finished.
Import a Single FR-7x Set from an
Optional USB memory
IMPORTANT NOTE
FR-7x SET that you import is converted in User Program
memories.
Be careful when you import SET do not overwrite User
Program memories that you need.
Always check the contents of the User Program memories
before deciding to overwrite them.
1.
Insert into the FR-8x USB port an optional USB memory
that contains data to import.
2.
Press the [MENU] button and use the [DATA/ENTER] knob
to select the following page:
For more information about how to navigate see
"Selecting Parameters Via the Menu" (p. 68).
3.
Rotate the [DATA/ENTER] knob to select the "Type" field
and push it.
4.
Rotate the [DATA/ENTER] knob to select "FR-7x Single
SET" and push it.
The display changes as follows:
5.
Use the [DATA/ENTER] knob to select "UPG Dest. Bank" to
set the number of bank that you want to import.
6.
Press the [MENU/WRITE] button.
The display shows the root folder of the USB memory.
Advertisement
Table of Contents
