Loading User Program Sets From A Usb Memory (Optional); Loading User Set Memories From A Usb Memory - Roland V-Accordion FR-18 diatonic Owner's Manual

V-Accordion FR-18 diatonic
Data management via the USB port
Loading User Program Sets from a
USB memory (optional)
The function discussed here allows you to load one of 4
User Program Sets (U01.USD~U04.USD) from a USB
memory to the FR-18 diatonic's internal memory.
NOTE
Be sure to connect your USB memory before proceeding.
1.
Connect an optional USB memory to the
FR-18 diatonic's USB MEMORY port.
2.
Press and hold the [SET] register (it flashes
slowly).
The treble keyboard doesn't play.
3.
Press button "35" on the treble keyboard to
select the "Load User Program" parameter.
See page 42 for the location of that button.
4.
The [SET] register flashes quickly and regis-
ters [1], [2], [3], [4] light yellow or red:
Red means that the USB memory contains no set-
tings for the corresponding User Program Set loca-
tion.
Yellow means that the USB memory does contain a
User Program Set.
File name:
Red
Yellow
In the example above, the USB memory contains the
User Program Set files U02.USD, U03.USD and
U04.USD.
The "Load User Program" function loads the User Pro-
gram Set files depending on the register numbers:
Register number
1
2
3
4
38
U02.USD U03.USD U04.USD
File name
"U01.USD"
"U02.USD"
"U03.USD"
"U04.USD"
5.
Press treble register [1], [2], [3] or [4] to
load the corresponding User Program Set.
You can only select registers that light yellow.
6.
Press the [SET] register again to exit Func-
tion mode.
NOTE
If one of the treble registers flashes red, the FR-18 diatonic
has noticed an error:
• Missing USB memory
• Load error
Loading User Set memories from a
USB memory
The FR-18 diatonic allows you to copy individual Sets
from a USB memory to the three internal "USER" Set
locations. The Set files (with the extension ".STD") must
first be copied to a USB memory's root directory before
loading them into the FR-18 diatonic's "USER" area.
1.
Connect an optional USB memory to the
FR-18 diatonic's USB MEMORY port.
2.
Press and hold the [SET] register (it flashes
slowly).
The treble keyboard doesn't play.
3.
Press button "36" on the treble keyboard to
select the "User Set" parameter.
See page 42 for the location of that button.
4.
The [SET] register flashes quickly and regis-
ters [1], [2], [3], [4] light yellow or red:
Red means that the USB memory contains no User
Set file (the corresponding treble register does noth-
ing).
Yellow means that the USB memory does contain a
User Set file (1, 2, 3 or 4).
File name: S02.STD S03.STD
Red (empty)
Yellow (existing file)
In the example above, the file "S01.STD" doesn't exist
on the USB memory.
5.
Press treble register [1], [2], [3] or [4] to
select the User Set settings you want to
load.
Select with register
1
2
3
S04.STD
File name
"S01.STD"
"S02.STD"
"S03.STD"