Table of Contents
Advertisement
Menu Options
Orchestra, Bass, etc.).
Warning
All settings of the target memory are overwritten. It might
therefore be a good idea to archive the target Set using
EXPORT" (p. 110)
before proceeding.
1.
Use the [DATA/ENTER] knob to select the SET whose
settings you wish to copy ("FROM").
2.
Use the [DATA/ENTER] knob to select the SET to which the
settings should be copied ("TO").
3.
Press [MENU/WRITE] to copy the settings.
The display changes to:
4.
Rotate the [DATA/ENTER] knob to select "YES", then push
the knob to copy the Set.
The display briefly confirms this operation.
Select "NO" if you do not want to copy the Set after all.
15.2 Copy EFFECT to SET
This parameter allows you to copy the settings of
the desired effects processors from one Set to
another. This may help you save time, because the
effects processors contain an impressive number
of parameters.
NOTE
This function does not effect the VTW organ effects.
1.
Use the [DATA/ENTER] knob to select the type of effect
you desire to copy ("TYPE").
Parameter
Value
TYPE
All, Reverb, Chorus, Delay
3.
Use the [DATA/ENTER] knob to select the SET whose effect
you wish to copy ("FROM").
4.
Use the [DATA/ENTER] knob to select the SET to which the
effect should be copied ("TO").
5.
Press [MENU/WRITE] to copy the effect.
The display changes to:
6.
Rotate the [DATA/ENTER] knob to select "YES", then push
108
the knob to copy effects.
The display briefly confirms this operation.
Select "NO" if you do not want to copy the effect after all.
"15.7
15.3 Treble register on current SET
1.
Select before the Set whose Treble registers you want to
edit simultaneously. See
2.
Use the [DATA/ENTER] knob to select the type of register
parameter you desire to edit for all Treble registers
("TYPE").
The field "VALUE" changes depending on the "TYPE" of selected
parameter. See the following table:
TYPE
Reed ALL,
Reed 16' ,
Reed 8' ,
Reed 8'-,
Reed 8'+,
Reed 4' ,
Reed 5-1/3' ,
Reed 2-2/3' ,
Vol All, Vol
16' , Vol 8' ,
Vol 8'-, Vol
8'+, Vol 4' ,
Vol 5-1/3' ,
Vol 2-2/3' ,
Noise,
Noise Vol,
Mus
Detune
3.
Use the [DATA/ENTER] knob to set the value ("VALUE").
4.
Press the [MENU/WRITE] to proceed.
If you selected "Reed ALL" or "Vol ALL", the following warning may
be displayed:
5.
To make your changes use the [DATA/ENTER] knob to
select "YES". Otherwise, select "NO".
This parameter allows you to change the settings
of the Right Hand register (Treble) in the current
SET.
This may help you save a lot of time, especially for
increasing or decreasing the volume of some or all
reeds, or for selecting a different noise type.
"How to Select Sets" (p.
VALUE
Explanation
Bandoneon, I-Folk, I-Folk2,
Classic, Cajun, Jazz, F-Folk,
D-Folk, Organetto, F-Folk2,
You can set the reed type for all
Classic2, Studio, Tradition,
reed ("Reed ALL") or for a specific
Steierische, OldItaly,
reed.
TexMex, Trikitixa, F-Jazz,
Classic3, Bajan
You can set the reed volume for
Off, –40~"Std"~+40
all reed ("Vol All") or for a specific
reed.
Bandoneon, I-Folk, I-Folk2,
Classic, Cajun, Jazz, F-Folk,
D-Folk, Organetto, F-Folk2,
It allows you to specify what
Classic2, Studio, Tradition,
kind of instrument should
Steierische, OldItaly,
generate the noise.
TexMex, Trikitixa, F-Jazz,
Classic3, Bajan
It allows you to specify how
Off, –40~"Std"~+40
prominent the noise should be.
Off, Dry, Classic, F-Folk,
American_L, American_H,
North_Eu, German_L,
It allows you to choose the
D-Folk_L, Italian_L,
system used for detuning the
German_H, Alpine,
8' reeds
Italian_H, D-Folk_H,
French, Scottish
42).
Advertisement
Table of Contents
