Table of Contents
Advertisement
loosen it
Bass Strap
NOTE
If you loosen the Bass strap adjuster too much, the Bass strap
will come out of the cabinet.
Securing the AC Adapter cable
Proceed as follows to ensure that the adapter cable doesn't come
loose while you are playing.
1.
Unfasten the indicated part of the back pad.
The back pad is attached with several clips. You only need to
unfasten the part shown in the illustration below
Notice the cable guide next to the right clip that is the closest one
to the connection panel.
Cable Guide
2.
Connect the small plug of the AC adaptor cable to the
FR-8x DC IN socket and wind the cable around its guide:
Adjuster
Right Clip
3.
Reinstall the back pad, while taking care to secure the
adapter cable you have just installed.
When finished, the FR-8x should look as follows:
4.
Reverse these steps to remove and disconnect the
adapter when you want to stop playing.
About Button Type Keyboard
The FR-8x give you a professional feeling
with a different touch thanks to new buttons
in synthetic nacre material.
How to Replace a Right Hand Button of
your FR-8x Keyboard
Your FR-8x uses the same treble buttons as an acoustic accordion.
You can replace the FR-8x treble buttons with other buttons com-
mercially available.
Use buttons with the following characteristics:
FR-8x Button with built-in screw
Button diameter
15 mm
Button thickness
~ 3.5 mm
Screw-Length
~ 9 mm
Screw-Diameter
2 mm
5.
Unscrew anti-clockwise the treble button that you want
to replace.
About Button Type Keyboard
25
Advertisement
Table of Contents
