Table of Contents
Advertisement
Menu Options
15.6 Restore Data
This function allows you to undo all or some
changes you made after last saving your settings
by reloading the last version you saved. This can
be handy when it turns out that your changes
don't yield the expected result and that starting all
over again would be quicker than changing the
parameters back.
NOTE
This function does not necessarily load the factory settings: it
loads the settings stored in the selected memory area(s).
1.
Use the [DATA/ENTER] knob to select the type of
parameters you desire to reload.
TYPE
Explanation
ALL,
Restores all of the FR-8x settings.
Restores the last "1.1 Master Tune" setting you saved (
Master Tune,
71).
Restores the last
Scale Tune,
saved.
System,
Restores the last "14. System" settings you saved (
Restores the last "16. MIDI Parameters" settings you
MIDI,
p.
112).
saved (
Restores the settings of all Sets and the registers they
All Sets
contain.
Set 1~100
Restores the settings of the selected Set.
2.
Press the [MENU/WRITE] button to reload the settings.
The display confirms this operation.
15.7 EXPORT
This function allows you to save the SET or User
Program data to the connected USB memory.
Parameter
Value
SET, User
Type
Program
SET File
ALL, Single
Select SET
1~100
ALL, Bank,
User Prog. File
Single, List
110
"1.3 Scale Tune" (p. 71)
settings you
p.
100).
Explanation
Select the type of data you want export.
Select "ALL" to export All SET.
Select "Single" to export the single SET.
MEMO
This field is active only if you
selected to export "SET".
Select the SET you want to export.
MEMO
This field is active only if you
selected to export a single SET.
Select "ALL" to export All User Program.
Select "Bank" to export all User Program
of the selected bank.
Select "Single" to export the single User
Program.
Select "List" to export the single User
Program List.
MEMO
This field is active only if you
selected to export "User Program".
Parameter
User Prog. Bank
User Prog. Num
See
"Export and Import Sets to/from the Optional USB memory" (p.
44).
See
"Export User Programs to the Optional USB memory" (p.
15.8 IMPORT
p.
Parameter
Type
SET File
Dest. SET
User Prog. File
UPG Dest. Bank
UPG Dest. Num
"Export and Import Sets to/from the Optional USB memory" (p.
See
44).
See
"Import User Programs to the Optional USB memory" (p. 66).
See
"Import FR-7x Sets from the Optional USB memory" (p.
Value
Explanation
Select the Bank of User Program you
want to export.
MEMO
1~100
This field is active only if you
selected to export a bank of User
Program.
Select the number of User Program you
want to export.
MEMO
1~14
This field is active only if you
selected to export a single User
Program.
This function allows you to import the settings of
a SET and User Program file. You can choose the
Set and User Program memory the settings should
be loaded to. Moreover you can import FR-7x SET.
Value
Explanation
SET, User
Program,
FR-7x All
Select the type of data you want import.
SETs, FR-7x
Single SET
Select "ALL" to import All SET.
Select "Single" to import the single SET.
ALL, Single
MEMO
This field is active only if you selected
to import "SET".
Select the SET you want to import.
MEMO
1~100
This field is active only if you selected
to import a single SET.
Select "ALL" to import All User Program.
Select "Bank" to import all User Program
of the selected bank.
Select "Single" to import a single User
ALL, Bank,
Program.
Single
MEMO
This field is active only if you selected
to import "User Program".
Select the Bank of User Program in
which you want to import data.
1~100
MEMO
This field is active only if you selected
to import a bank of User Program.
Select the number of User Program you
want to import.
1~14
MEMO
This field is active only if you selected
to import a single User Program.
64).
45).
Advertisement
Table of Contents
