Expansion Memory Modules - HP EliteBook 8560w Maintenance And Service Manual

Expansion memory modules

NOTE:
A computer having a system board with spare part number 652637-001, 656213-002, 684318-001, or
684320-001 has two memory module slots, which are called primary memory slots in this MSG.
When you add or replace memory modules, slot 1 must be populated before slot 2 is populated.
A computer having a system board with spare part number 652638-001, 656214-002, 684319-001, or
684321-001 has four memory slots. On these computers, in both the expansion memory slots (on the
bottom of the computer) and the primary memory slots (under the keyboard), slot 1 must be
populated before slot 2 is populated.
Description
2 GB (PC3-10600, 1333 MHz, DDR3)
4 GB (PC3-10600, 1333 MHz, DDR3)
8 GB (PC3-10600, 1333 MHz, DDR3)
Before removing a memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
Remove the memory module:
1. Position the computer upside-down, with the front toward you.
2. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
Downloaded from LpManual.com Manuals
Expansion memory slots are located in a compartment on the bottom of the computer.
Battery on page 48).
Service access cover on page
Component replacement procedures
Spare part number
621565-001
621569-001
634091-001
50).
51