Fingerprint Reader Board - HP EliteBook 8560w Maintenance And Service Manual

Fingerprint reader board

Description
Fingerprint reader board (includes bracket)
Before removing the fingerprint reader board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
Remove the fingerprint reader board:
1. Position the top cover upside-down, with the front toward you.
2. Remove the Phillips M2.0×3.0 screw (1) that secures the fingerprint reader board to the top
cover.
3. Remove the fingerprint reader board bracket (2) from the fingerprint reader board.
78 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Battery on page 48).
Service access cover on page
Hard drive on page 60)
Optical drive on page
Keyboard on page 67)
Top cover on page 71)
65)
Spare part number
652681-001
50).